Lenze EtherCAT Controller-based Automation Bedienungsanleitung PDF herunterladen (Seite 100)

7 Commissioning of the system

7.3 Detailed description of the commissioning steps

100

Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.3.14.3 PDO mapping for logic devices

If the device descriptions for logic devices that are supplied with the »PLC Designer« are used, the

process data are copied to the subordinate logic drive node automatically.

If the process data are still to be linked manually, activate the "direct access to I/O addresses by the

application" option.

In this setting, the prepared function blocks are not

usable.

The process data (I/O addresses) must be linked manually.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 204 205

Keine Kommentare

Lenze EtherCAT Controller-based Automation Bedienungsanleitung Seite 100