Lenze EtherCAT Controller-based Automation Bedienungsanleitung PDF herunterladen (Seite 108)

8 Mixed operation - EtherCAT with other bus systems

8.2 PROFIBUS as the logic bus and EtherCAT as a logic bus or motion bus

108

Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.2 PROFIBUS as the logic bus and EtherCAT as a logic bus or motion bus

[8-2] Example: Mixed operation of EtherCAT with PROFIBUS connected to a 3231 C controller with Servo-Inverter i700 and Servo

Drives 9400

 Note!

In the Lenze automation system, only the PROFIBUS master functionality (Logic Bus) is

supported.

The Motion functionality is not supported when PROFIBUS is used. Always use EtherCAT

to connect inverters to be controlled via the central motion functionality.

 Communication manual for Controller-based Automation with PROFIBUS

Here you can find information on how to commission PROFIBUS components.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 204 205

Keine Kommentare

Lenze EtherCAT Controller-based Automation Bedienungsanleitung Seite 108