Lenze E84AYCIB Bedienungsanleitung PDF herunterladen (Seite 62)

E84AYCIB communication manual (INTERBUS)

Error messages

Possible causes and remedies

62 L EDS84AYCIB EN 4.0 - 11/2010

Invalid module configuration [0x01bc6430]

Invalid configuration [0x01bc8125]

Communication stack reset [0x01bc8126]

Invalid initialisation [0x01bc8127]

Data exchange stopped [0x01bc8131]

Response (Lenze setting in bold) Setting: not possible

 None  System fault : Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information

Cause Remedy

Module configuration is faulty. Check and correct module configuration.

Response (Lenze setting in bold) Setting: not possible

 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked : Warning  Information

Cause Remedy

The active configuration is invalid:

• Data word sum (PD + PCP) > 10 words

• Data word sum (PD + PCP) = 0

Adapt the number of PD and PCP:

• Data word sum (PD + PCP) = 1 ... 10 words

Response (Lenze setting in bold) Setting: not possible

 None  System fault : Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information

Cause Remedy

Error during processing the INTERBUS services Execute reinitialisation by the master.

Response (Lenze setting in bold) Setting: not possible

 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked : Warning  Information

Cause Remedy

The INTERBUS initialisation has failed. Execute reinitialisation by the master.

Response (Lenze setting in bold) Setting: C13880/1

: None  System fault : Fault  Trouble : Quick stop by trouble : Warning locked  Warning : Information

Cause Remedy

The data exchange at the INTERBUS has been

terminated.

• Check cables and connections.

• Execute reinitialisation by the master.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 74 75

Keine Kommentare

Lenze E84AYCIB Bedienungsanleitung Seite 62