Lenze MC3000 Series Bedienungsanleitung PDF herunterladen (Seite 30)

26 13435743_EDBM301_v14.0

The following table shows the possible DRIVE STATUS indications that can appear on

the drive display:

DRIVE STATUS TABLE

DISPLAY DESCRIPTION

STOP Drive to STOP mode - No output to motor.

RUN

Drive is in RUN mode and is within + 0.3 Hz of the speed setpoint.

FAULT

Drive has shut down due to a FAULT condition. If the fault condition

has passed, pressing the STOP key will clear the fault and return the

drive to the STOP mode.

LOCK Drive is in FAULT LOCKOUT after ve unsuccessful restart attempts.

BRAKE DC BRAKE is energized.

LIMIT

Drive is in CURRENT LIMIT due to an overloaded motor, or ACCEL

is set too fast.

F DEC Drive is in DECEL FREEZE because DECEL is set too fast.

13.2.2 MC3000 DISPLAY IN RUN MODE

When the drive is in the RUN mode, the default display will look like this:

RUN > 60.00 HZ

DRIVE

STATUS

SPEED

SETPOINT

SPEED

UNITS

DIRECTION

(FORWARD)

As in the STOP mode, the ENTER key can be used to toggle the display from SPEED

to % LOAD to VAC (motor voltage):

RUN > 85% LOAD

DRIVE

STATUS

PERCENT

LOAD

DIRECTION

(FORWARD)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 83 84

Keine Kommentare

Lenze MC3000 Series Bedienungsanleitung Seite 30