Lenze MC3000 Series Bedienungsanleitung PDF herunterladen (Seite 32)

28 13435743_EDBM301_v14.0

13.2.4 MC3000 DISPLAY IN AUXILIARY MODE

If the ENTER key is held down, the display will enter the auxiliary mode and cycle between

two displays: a CONTROL display that indicates the control source (LOCAL, REMOTE, or

SERIAL), AUTO or MANUAL mode, and the speed reference source, and a TIME display

that indicates total elapsed run time. When the ENTER key is released, the display will

return to the previous screen. Examples of the auxiliary mode displays are shown below:

CONTROL DISPLAY

LOCAL -- AUTO -- IDC

CONTROL

SOURCE

AUTO/MAN

MODE

SPEED

REFERENCE

SOURCE

TIME DISPLAY

TIME: 487.2 HRS

The table below shows the possible SPEED REFERENCE SOURCE indications for the

CONTROL display in the auxiliary mode:

SPEED REFERENCE SOURCE TABLE

DISPLAY DESCRIPTION

KEY KEYPAD - p and q keys.

VDC

0 - 10 VDC analog input at TB-5A (In PID mode, this indicates that

the SETPOINT reference is a 0-10 VDC signal).

IDC

4 - 20 mA analog input at TB-5B (In PID mode, this indicates that

the SETPOINT reference is a 4-20 mA signal).

SP#1 - SP#4 PRESET SPEED #1 - PRESET SPEED #4

MKB

MANUAL KEYBOARD - The p and q keys are used for speed

control. This occurs in PID mode when the drive is put into HAND

(open-loop) mode.

AKB

AUTO KEYBOARD - The p and q keys are used as the PID

SETPOINT reference. This occurs in PID mode when the drive is

put into AUTO (closed-loop) mode.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 83 84

Keine Kommentare

Lenze MC3000 Series Bedienungsanleitung Seite 32