Lenze MC3000 Series Bedienungsanleitung PDF herunterladen (Seite 43)

13435743_EDBM301_v14.0 39

16.2 PARAMETER ACCESS USING SPEED DIAL

SPEED DIAL is used to access parameters quickly using the parameter number. Once

accessed, the parameter can be programmed as described in Section 16.1. SPEED

DIAL is accessed by pressing the AUTO/MAN key while in the PROGRAM mode. This

will activate the SPEED DIAL display as shown below:

- SPEED DIAL -

Once in SPEED DIAL, the p and q keys will allow the operator to scroll through the

parameter numbers. The display will continue to show SPEED DIAL while scrolling through

the parameter numbers, as shown below:

#11 SPEED DIAL

When the desired parameter is reached, the SPEED DIAL display will be replaced by

the parameter name:

#11 MAX FRQ

Once the desired parameter is displayed on the screen, press the ENTER key to display

the parameter name and present setting. The parameter setting can now be changed by

the method described in Section 16.1. Press the AUTO/MAN key to return to SPEED DIAL.

NOTE

SPEED DIAL is only active in MC3000 drives which have the Modbus

serial communications protocol. Units that have the Metasys protocol

do not have this feature.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 83 84

Keine Kommentare

Lenze MC3000 Series Bedienungsanleitung Seite 43