Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung PDF herunterladen (Seite 121)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013 121

The L_EATP_ApplicationTemplate library

1_POUs - Program Organization Units

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• Optionally, the error can be acknowledged by means of the baseChannelSetErrorQuit method.

11.2.5 L_EATP_Module

This FB provides the empty basic FB of a machine module.

• All further machine modules are derived from this FB.

Inputs

Outputs

11.2.5.1 Base()

...is a management function for infrastructure processing.

• This method is to be called first in the body of the FB during every cycle.

Function library: L_EATP_ApplicationTemplate

Runtime software licence:  LPC 1x00  MPC 1x00

 MPC 2x00

 MPC 2x10

 MPC 2x20

 MPC 2x30

 MPC 3x00 ; None

L_EATP_Module

L_EATP_BUS ⎯ masterBus slaveBus ⎯ L_EATP_BUS

L_EATP_MM_Address ⎯ MM_Address

Identifier/data type Information/possible settings

masterBus

L_EATP_BUS

Provides a link to the higher level machine module (master).

• For the highest machine module, this input is unassigned.

MM_Address

L_EATP_MM_Address

Relative module ID of the machine module.

• Must be unique within a hierarchy level (a master with all directly connected

slaves).

Identifier/data type Information/possible settings

slaveBus

L_EATP_BUS

Provides the link to all subordinated machine modules (slaves).

• For slaves of the lowest hierarchy level, this output is not assigned.

Return value

Data type Value/meaning

BOOL Gives a response as to whether the infrastructure has been established correctly.

Note: All methods and data regarding the infrastructure must only be used if the

return value is "TRUE" first.

TRUE Infrastructure established correctly (Success)

FALSE Infrastructure not correct (Error)

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 176 177

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung Seite 121

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze PLC Designer ApplicationTemplate (PLC Designer R3-