Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung PDF herunterladen (Seite 43)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013 43

Working with the ApplicationTemplate

Mapping the actual machine structure in the »PLC Designer«

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• If the "Distributed Clocks" option is activated for all controllers and communication is

successful, the EtherCAT Master provides the "DC In-Sync" message:

8.1.2 Adding devices - CANopen bus system (optional)

In order to map the desired machine structure on the basis of the ApplicationTemplate, the

corresponding devices have to be added in the Device view.

 How to proceed:

1. Select the controller

• In the context menu, execute the Add device command to add "CANbus" to the bus

system .

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 176 177

Keine Kommentare

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung Seite 43