Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung PDF herunterladen (Seite 162)

Application example: Flying saw

Setting up communication between master modules and slave modules

162

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• The size of the transferred structure must be assigned to the dwSize input.

This step is required for all slave modules directly below the MM_A01_MachineControl

master module.

• In this example, the MM_B02_FlyingSaw machine module is the higher-level master

module of the MM_C01_Slide and MM_C02_Blade slave modules.

• Steps 1 to 3 must be executed for the MM_C01_Slide and MM_C02_Blade slave modules

in the MAP_B02_FlyingSaw_App1 module application.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 176 177

Keine Kommentare

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung Seite 162