Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung PDF herunterladen (Seite 50)

Working with the ApplicationTemplate

Mapping the actual machine structure in the »PLC Designer«

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3. The selection of a special bus cycle task on the CANopen I/O image of the CANopen

manager is not mandatory.

The standard setting uses the task with the shortest cycle time that accesses the devices of

the CAN master as bus cycle task:

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 176 177

Keine Kommentare

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Bedienungsanleitung Seite 50