Lenze EVS9332xK Bedienungsanleitung PDF herunterladen (Seite 339)

Function library

Function blocks

3−311

EDSVS9332K−EXT EN 4.0

3.2.98.3 Phase displacement

Phase displacement for synchronisation via system bus (SYNC TIME)

Code Value Function

C1122 0 ...10.000 s  C1120 = 1

– Phase displacement between the sync telegram and the start of the internal control program.

– The parameters are set automatically depending on the parameter setting of the system bus (CAN).

 C1120 = 2

– C1122 has no effect.

Phase displacement for synchronisation via terminal (PHASESHIFT)

Code Value Function

C1123/1 −1.000 ms

+1.000 ms

 C1120 = 1

– C1123/1 has no effect.

 C1120 = 2

– Phase displacement between the sync signal and the start of the internal control program (e. g. for

compensating the effects of signal propagation delays/dead times for the sync signal of the single

slave drives).

3.2.98.4 Time slot for synchronisation via terminal

Code Value Function

C1123/2 0 ... 1.000 ms  C1120 = 1

– C1123/2 has no effect.

 C1120 = 2

– Definition of a "time slot" for the LOW−HIGH edges of the sync signal for the slave (defined via

C1121/1).

– If the sync signal sent by the master is within the "time slot", the SYNC1−STAT is switched to HIGH.

S Y N C - C y c l e ( C 1 1 2 1 / 1 )

S Y N C - W i n d o w ( C 1 1 2 3 / 2 )

S Y N C - S i g n a

Fig. 3−252 Time slot" for the LOW−HIGH edges of the sync signal

Tip!

A jitter of up to ±200 μs on the LOW−HIGH edges of the sync signal is permissible. The size of the

jitter affects the parameter setting of the "time slot".

1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 385 386

Keine Kommentare

Lenze EVS9332xK Bedienungsanleitung Seite 339