Lenze EVS9332xK Bedienungsanleitung PDF herunterladen (Seite 359)

100

101

Function library

Function blocks

3.2.103 Stretching, compression, offset in Y direction (YSET1)

3−331

EDSVS9332K−EXT EN 4.0

3.2.103.1 Stretching/compression

YSET1−FACT Stretching/compression Direction reversal

+100 % No No

−100% No Yes, in Y position

>100 % Stretching No

<100 % Compression No

FIXED100% No No

Synchronised stretching/compression of drive motion

Synchronised stretching/compression of the drive motion is required for the following:

l If master value and cam drive must run absolutely synchronously and

l the factor must be changed during operation.

) Note!

This function is only valid for the cam drive, not for the master drive!

This function should be used if more than 8 profiles are required to change the lift of

the cam drive.

The lift can be changed online via stretching and compression.

Function block interconnection

C1356/1

C1352/1

C1358/1

C1358/2

C1354/2CDATA-X0

CDATA-SYNCH

CDATA-NOUT

C1357/1

C1353/1

C1359/1

C1359/2

C1355/2

YSET1-OFFS

YSET1-FACT

YSET1-OUT

YSET1-LIM

YSET1-IN

CTRL

YSET1-IN-SYNCH

YSET1-SYNCH

YSET1

YSET1-RESET

C1354/1

C1355/1

C1364/1 C1351

C1350

fb_yset1_1

Activate function

Activate function with C1313 = 1.

The changeover is carried out during zero crossing of the profile.

) Note!

Stretching/compression in X direction can be carried out via the input

CDATA−XFACT.

3.2.103.2 Offset

Use input YSET1−OFFS to shift the Y position by a constant value.

1 2 ... 354 355 356 357 358 359 360 361 362 363 364 ... 385 386

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze EVS9332xK Bedienungsanleitung Seite 359

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze EVS9332xK