Lenze c300 Bedienungsanleitung PDF herunterladen (Seite 103)

12 Visualisation with »VisiWinNET®«

12.4 Use the Direct driver "LogicAndMotionV3" (local visualisation)

103

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4. Configure the added communication channel:

•A Line must be activated and the PLC address (node address) of the Controller must be

specified.

• The PLC address and the IP address of the target device (Controller) must be specified.

(Preset IP address of the Controller: 192.168.5.99)

Note: The PLC address can be found in the »PLC Designer« in the context menu of the

device: DeviceCommunication SettingsIPC:Node Address

Further information on the configuration of the communication channel can be found in

the »VisiWinNET®« online help. Click the Help button to call the online help.

5. In a next step, you can browse variable definitions:

Using the variables browser to access variables (browse variables)

( 105)

6. After completion of the project configuration, the Project Explorer is provided with a new

channel: "LogicAndMotionV3".

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 194 195

Keine Kommentare

Lenze c300 Bedienungsanleitung Seite 103