Lenze c300 Bedienungsanleitung PDF herunterladen (Seite 126)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17 126

12 Visualisation with »VisiWinNET®«

12.8 Lenze specifications

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

12.8 Lenze specifications

12.8.1 Install additional fonts

 How to install additional fonts for visualisation:

1. Copy the additional font file to the \USBStorage\Fonts directory on the SD card.

2. In the PostStart.txt file, add the AddFont.exe entry.

The PostStart.txt file is in the \USBStorage directory (basic directory of the SD card).

12.8.2 Timeout (waiting position) of the CAN OPC server influences the time response of the

visualisation

When the visualisation directly accesses the parameters of an inverter and does not get any

response afterwards, this will cause a timeout (waiting position) of the

CAN OPC server.

Remedy

When the timeout is changed in the registry, the visualisation can be operated again. For this

purpose you must enter the following data in the PostStart.txt file. This sets the timeout to

200 ms.

The designation CANXBusY

designates the respective CAN interface.

Examples:

• The first CAN interface is called: CAN2Bus1

• The second CAN interface is called: CAN2Bus2

 Note!

The timeout occurs if...

• VWGET / VWSET is used to read / write a variable via the CAN OPC server and the node

does not respond to it (SDO);

• alarms or trends are connected to a variable which is retrieved via the CAN OPC server

and the node does not respond to it (SDO);

• ...no node is connected and no feedback takes place, a timeout is caused.

The timeout of the CAN OPC server affects the display speed of the visualisation. This

may, for instance, cause a time delay for the page changeover in the visualisation.

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\CANXBusY]

"SDOTimeout"=dword:0xc8

"Timeout"=dword:0xc8

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 194 195

Keine Kommentare

Lenze c300 Bedienungsanleitung Seite 126