Lenze c300 Bedienungsanleitung PDF herunterladen (Seite 39)

5 Commissioning the controller

5.5 I/O system 1000 at the backplane bus of a cabinet controller

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5.5 I/O system 1000 at the backplane bus of a cabinet controller

The Cabinet Controllers 3200 C and c300 allow for a direct connection of the I/O system 1000 to the

integrated backplane bus.

The modules of the I/O system 100 connected to the backplane bus of the Controller can be

parameterised in the »PLC Designer«.

5.5.1 Configuring I/O modules at the backplane bus

The following illustration is a schematic representation of the controller hardware structure

including I/O modules.

The I/O system 1000 includes the following components:

• I/O module coupler for voltage supply of the I/O compound modules

• I/O compound modules:

Up to 64 modules are possible which are connected to the Controller 3200 C via the Lenze

backplane bus.

In order to be able to access the modules by means of a PLC program (read input signals/write

output signals), the modules have to be configured in the »PLC Designer«. For this, map the physical

arrangement of the I/O modules in the »PLC Designer«.

[5-4] Example: mapping the physical arrangement of modules 1...7 in the »PLC Designer«

 System manual for I/O system 1000 (EPM-Sxxx)

Here, further information on the parameter setting/configuration can be found.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 194 195

Keine Kommentare

Lenze c300 Bedienungsanleitung Seite 39