Lenze L-force I/O System 1000 Bedienungsanleitung PDF herunterladen (Seite 37)

2.0 EN - 11/2010 L 37

L-force Controls | I/O System 1000

Parameter setting

Electronic modules - digital output

6.3.2 "DO2 Timestamp" electronic module

6.3.2.1 Parameters tab

Use the Parameters tab to select the settings for the electronic module. In addition, the

channel status is indicated.

 How to parameterise the electronic module:

1. Select the electronic module in the project view.

2. Click the Parameters tab in the workspace.

3. Make settings for each channel.

6.3.2.2 TimeStamp function

Description

Long cycle times or cycle times varying as a function of the fieldbus load will inevitably lead

to large inaccuracies if switching at an exact point in time is required. Using the

Legend Description Index

Module status Display of the current status:

• 00h/80h: OK

• 01h/81h: No next entry

• 02h/82h: No new entries available

• 03h/83h: FIFO memory full. No new entries possible.

0x5440

Running number Display of the "Channel status" and "Channel status ticker value" referred to

the running number (RN).

Click the input field to open the drop down menu and select the required

running number (subindex of 0x5640).

•1…4

–The display values for "Channel status" and "Channel status ticker

value" are refreshed automatically.

0x5640

Channel status Display of the current output signal.

• TRUE: Signal level = HIGH

• FALSE: Signal level = LOW

0x5640

Channel status ticker

value

Display of the current ticker value in [μs]. 0x5640

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 98 99

Keine Kommentare

Lenze L-force I/O System 1000 Bedienungsanleitung Seite 37