Lenze L-force I/O System 1000 Bedienungsanleitung PDF herunterladen (Seite 58)

L-force Controls | I/O System 1000

Parameter setting

Electronic modules - counters

58 L 2.0 EN - 11/2010

Comparison value with zero pulse duration

The hysteresis is activated if the comparison condition is met. When the hysteresis is

activated, the comparison result remains unchanged until the count value drops out of the

set hysteresis range. After the count value has exited the hysteresis range, the comparison

conditions must be met once more for the hysteresis to be activated again.

c Count value = comparison value: Output is set and hysteresis is activated

d Hysteresis range is exited: Output is reset and count value < comparison value

e Count value = comparison value: Output is set and hysteresis is activated

f Output is reset because hysteresis range is exited and count value > comparison value

g Count value = comparison value and hysteresis is active: Output remains set

h Count value ≥ comparison value: Output is not set because hysteresis is activated

i Hysteresis range is exited and count value > comparison value: Output is reset

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 98 99

Keine Kommentare

Lenze L-force I/O System 1000 Bedienungsanleitung Seite 58