Lenze L-force I/O System 1000 Bedienungsanleitung PDF herunterladen (Seite 40)

L-force Controls | I/O System 1000

Parameter setting

Electronic modules - digital output

40 L 2.0 EN - 11/2010

6.3.3 "DO2 PWM" electronic module

6.3.3.1 Parameters tab

Use the Parameters tab to select the settings for the electronic module. In addition, the

channel status is indicated.

 How to parameterise the electronic module:

1. Select the electronic module in the project view.

2. Click the Parameters tab in the workspace.

3. Make settings for each channel.

Legend Description Index

Accept module

parameter

Changed settings will not be accepted until the function has been executed.

Click the input field to open the drop down menu.

• 255: Accept module parameters

0x31FF

Cycle duration Selection of the cycle duration in [μs]. The duty cycle is determined by

selecting the cycle duration and the pulse duration.

Input area:

1{1μs} 175000

Index representation:

48 {1} 8388607

PWM 1:

0x3100,

0x3103

PWM 2:

0x3104

0x3107

Pulse duration Selection of the pulse duration in [μs]. The duty cycle is determined by

selecting the cycle duration and the pulse duration.

Input area:

1{1μs} 175000

Index representation:

48 {1} 8388607

0x5620

Interpulse period Display of the interpulse period

• Cycle duration minus pulse duration results in the interpulse period.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 98 99

Keine Kommentare

Lenze L-force I/O System 1000 Bedienungsanleitung Seite 40