Lenze Engineer v2.21 Bedienungsanleitung PDF herunterladen (Seite 145)

Lenze · Engineer · 2.13 EN - 10/2014 145

Defining the system functionality

Configuring the terminal assignment

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.8.3 Setting the active level of the digital terminals

For each digital terminal the set active level is displayed:

 Click on the or button to alter the active level for the associated digital terminal

from "high-active" to "low-active" or from "low-active" to "high-active".

8.8.4 Displaying the actual status of the terminals

If an online connection to the device is available, the Terminal assignment tab displays the actual

state of the terminals.

Analog inputs/outputs

For the analog inputs/outputs the corresponding actual value is displayed as voltage value:

• The actual values for the analog inputs are displayed in accordance with the selected form of

signal adaptation (offset & gain) in each case.

Digital inputs/outputs

For the digital inputs the current status is visualised by an "LED":

• The status display for the digital inputs considers the selected form of terminal polarity.

Icon Meaning

Digital terminal is "High active"

Digital terminal is "Low active"

Icon Meaning

Off

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 311 312

Keine Kommentare

Lenze Engineer v2.21 Bedienungsanleitung Seite 145