Lenze Engineer v2.21 Bedienungsanleitung PDF herunterladen (Seite 186)

Defining the system functionality

Creating an interconnection via the electrical shaft

186

Lenze · Engineer · 2.13 EN - 10/2014

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.14.4 Establishing an interconnection via an electrical shaft

In »Engineer« the interconnection is created by means of an electrical shaft with the help of a

wizard, which makes all the necessary entries step by step:

1. The specification of a definite designation.

• As several electrical shafts can be implemented within a machine.

2. The assignment of axes to the electrical shaft.

• Because not all axes of a machine necessarily have to be operated from the electrical shaft.

• You can also assign non-cam-capable axes to the electrical shaft so that an interconnection

can for instance be configured from a following axis and several cam axes with different

device series.

3. The assignment of the measuring systems for the corresponding axis and the master value

according to the x/y axis in the worksheet of the »Cam editor«.

 Tip!

So-called "wildcards" can also be added to the electrical shaft. A wildcard can be used to

delete real axes from the electrical shaft without the cam data and the measuring systems

being lost.

Adding placeholders to the interconnection

( 190)

Assigning an axis to a placeholder

( 191)

Cancelling existing assignments

( 193)

 How to insert an electrical shaft in the project view:

1. In the Project view, either select

• the project element , or

• select an already existing system module, into which the electrical shaft is to be

inserted.

2. Click the icon to insert a machine application.

3. Select the "electrical shaft" in the Machine application dialog box.

4. Confirm selection with OK.

• A wizard is then started which makes all the necessary entries step by step.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 311 312

Keine Kommentare

Lenze Engineer v2.21 Bedienungsanleitung Seite 186