Lenze Engineer v2.21 Bedienungsanleitung PDF herunterladen (Seite 78)

Establishing an online connection

Going online

Lenze · Engineer · 2.13 EN - 10/2014

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

dialog box appears after the update has been carried out:

• Detailed information on how to set the communication path can be found in the

following subchapter "Setting the communication path

". ( 79)

After the communication path to be used has been set correctly:

3. Click Connect.

• The dialog box closes and the online connection to the device is established.

• The available online connection to the device is displayed by a yellow highlighted icon in

the Project view:

Now you can use the icons and to easily build up and close an online connection

with the device. The communication settings are only required when communication with

a device is built up for the first time.

• If you want to change the communication path configured, select the Online  Set

communication path and go online menu command.

• The desired changes for all devices of the project are to be carried out in the

Communication path dialog box.

• When an online connection has been established the current parameter settings in the device

are displayed in the »Engineer«

• The yellow background colour signalises an online connection and the online

parameters of a device.Displaying parameter values

( 22)

Example 1: 9400 HighLine controller

Example 2: EL 870 controller and four axes

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 311 312

Keine Kommentare

Lenze Engineer v2.21 Bedienungsanleitung Seite 78