Lenze Engineer v2.21 Bedienungsanleitung PDF herunterladen (Seite 291)

Lenze · Engineer · 2.13 EN - 10/2014 291

Appendix

Creating cam data with the »Cam Editor«

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8. Optional: Adding additional cams.

• To do this, enter the position/duration of the cam and then click the Add button.

Example: Four position cams with a positive effective direction:

9. Click OK in order to accept the settings and close the dialog box.

Cam types

Representation Meaning

Position cam with a positive effective direction

• Switch-on and switch-off positions are specified in advance by means of positions.

• The cam switches if the direction of movement is positive (positive speed).

Position cam with a negative effective direction

• Switch-on and switch-off positions are specified in advance by means of positions.

• The cam switches if the direction of movement is negative (negative speed).

Position cam with a bipolar effective direction

• Switch-on and switch-off positions are specified in advance by means of positions.

• The came switches if the direction of movement is positive or negative.

Position-time cam with a positive effective direction

• The cam switches at the switch-on position if the direction of movement is positive

(positive speed).

• After the time defined the cam switches off again.

Position-time cam with a negative effective direction

• The cam switches on at the switch-on position if the direction of movement is negative

(negative speed).

• After the time defined the cam switches off again.

1 2 ... 286 287 288 289 290 291 292 293 294 295 296 ... 311 312

Keine Kommentare

Lenze Engineer v2.21 Bedienungsanleitung Seite 291