Lenze PLC Designer R3-x Bedienungsanleitung PDF herunterladen (Seite 28)

Working with the sample projects

Sample project with the "Actuator speed" application - Actuator Speed

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4. Update the project by clicking :

• Select the option Rebuild all

•Click the Build button to update the project.

5. Going online

• After a connection to the controller has been established successfully, the following status is

displayed in the Status line:

6. Download parameter set

• This command has the effect that the application and the parameter settings of the

»Engineer« project overwrite the parameter settings in the controller.

7. Optional: Adapt desired communication settings (for instance network address, baud rate).

8. Store parameter set

9. Mains switching to accept the communication settings to the device.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 158 159

Keine Kommentare

Lenze PLC Designer R3-x Bedienungsanleitung Seite 28