Lenze PLC Designer R3-x Bedienungsanleitung PDF herunterladen (Seite 37)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014 37

Working with the sample projects

Sample project with the "Actuator speed" application - Actuator Speed

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.1.6.5 Parameter

The Parameter button selects the visualisation of the parameter FBs.

• The mode selected last remains active.

• You can use the FBs to...

• read individual parameters

• write individual parameters

•Area  shows the FB for reading parameters.

For more information on the FB, please see the following section:

L_DCO_ReadDriveParameter

( 105)

•Area  shows the FB for writing a parameter table.

Further information on the FB can be found in the following section:

L_DCO_WriteDriveParameter

( 110)

 Read parameters  Write parameters

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 158 159

Keine Kommentare

Lenze PLC Designer R3-x Bedienungsanleitung Seite 37