Lenze PLC Designer R3-x Bedienungsanleitung PDF herunterladen (Seite 55)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014 55

Extending sample projects - adding devices

Create control configuration - bus system CAN

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Use the CANbus tab to set the baud rate.

3. Use the Add Device command to extend the control configuration by "CANopen

Manager".

 Note!

The baud rate set in the »PLC Designer« overwrites the baud rate set for the field devices

via »WebConfig«/»Engineer«.

In a CANopen network, set the same baud rate for all nodes.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 158 159

Keine Kommentare

Lenze PLC Designer R3-x Bedienungsanleitung Seite 55