Lenze PLC Designer R3-x Bedienungsanleitung PDF herunterladen (Seite 35)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014 35

Working with the sample projects

Sample project with the "Actuator speed" application - Actuator Speed

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• Button  selects the manual (manual jog) mode.

• In the control and status panel  the FB for actuating the controller is visualised.

Note: Activate button  to be able to operate the controller via the visualisation.

• Enable the controller via the xDriveEnable FB input to be able to define setpoints manually.

Note: Click the xDriveSetQsp button to activate quick stop.

For more information on the FB, please see the following section:L_LCB_ActuatorSpeed

( 120)

 Select mode Control panel Activate control via visualisation

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 158 159

Keine Kommentare

Lenze PLC Designer R3-x Bedienungsanleitung Seite 35