Lenze 3200 C Bedienungsanleitung PDF herunterladen (Seite 30)

Electrical installation

Connecting voltage supply (24 V)

Connection plan

Lenze ¯ BA_3241C ¯ 4.0

6.3 Connecting voltage supply (24 V)

 Stop!

No device protection against excessive input voltage

The voltage input is not fused internally.

Possible consequences:

¯ The device can be destroyed when the input voltage is too high.

Protective measures:

¯ Observe the max. permissible input voltage.

¯ Professionally fuse the device on the input side against voltage

fluctuations and voltage peaks.

 Note!

The IPC boots up as soon as the supply voltage is applied.

After the operating system has been shut down, the IPC switches off

automatically. For restarting, the supply voltage has to be disconnected

for a short time.

6.3.1 Connection plan

+24

PE +24 V

CPC2xx−006

Fig. 6−1 Connection plan for voltage supply (24 V)

Pos. Description

IPC

B Power supply unit

PE conductor connection on the supply side via DIN rail

6.3.2 Mains connection (24 V)

Figure Connection Connection type Cable type

0V U

X1:

DC voltage supply (24 V)

3−pin Combicon socket

Cable with Combicon plug

(conductor cross−section

max. 2.5 mm

)

IPC001

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Keine Kommentare

Lenze 3200 C Bedienungsanleitung Seite 30