Lenze DSD Bedienungsanleitung PDF herunterladen (Seite 141)

100

101

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23 141

7Applications

7.11 Roller conveyor

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.11.2.2 Leverage of rolling friction

7.11.2.3 Chain efficiency

7.11.2.4 Bearing diameter

7.11.2.5 Moment of inertia of transport rollers

Symbol Description

f The lever arm of the rolling friction serves to calculate the friction force.

• Value can be entered directly or selected from the "Physical coefficients" table.

Lever arm of rolling friction

Symbol Description

Chn

Values for the efficiency η

Chn

per complete wrap:

Chain = 0.90 - 0.96 (depending on the chain size)

Toothed belt = 0.96 - 0.98 (depending on the material)

Flat belt = 0.93 - 0.98 (depending on the material)

V-belt = 0.88 - 0.95

Rubber strap = 0.80 - 0.85

Non-metallic strap = 0.80 - 0.85

Wire rope = 0.90 - 0.95

 Note!

When the power is transmitted from the drive to the transport rollers, the efficiency

Chn

of the chain is reduced with every chain wrap.

•The efficiency η

Chn

exponentiates with the number of chain wraps N

Chn

• Position the drive centrally if necessary to distribute the power transmission to two

paths. That way, the number of chain wraps per path is also reduced.

• Realistic values must be assumed for the efficiency η

Chn

Symbol Description

Brg

The diameter for calculating the bearing friction.

Symbol Description

aux

Moment of inertia of the transport rolls, shafts, etc.

• Has an impact on the dynamic torque!

• Value can be entered directly or calculated using the inertial calculator.

Inertial calculator

( 407)

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 495 496

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze DSD Bedienungsanleitung Seite 141

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze DSD