Lenze DSD Bedienungsanleitung PDF herunterladen (Seite 452)

100

101

18 Drive dimensioning messages

18.4 Lenze gearbox

452

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

18.4.6 Utilisation of the clutch >100 % regarding the speed

18.4.7 Thermal overload when mineral gearbox oil is used

18.4.8 Utilisation is xxx %, regarding the max. torque

Warning!

The utilisation of the clutch (motor-gearbox) relative to the speed is xxx %. Thus the limit value of 100 %

is exceeded.

Cause Effects Possible remedies

The medium motor speed is too high. • The clutch between motor and

gearbox is overused.

• The clutch is destroyed after a

short time!

• Select a different gearbox.

• Optimise application.

Check of the torque load

( 332)

Note!

When mineral oil is used, the gearbox will be thermally overloaded.

Use Viton shaft sealing rings and use synthetic oil!

Cause Effects Possible remedies

Mineral oil is less temperature-sta-

ble, less powerful and has a smaller

viscosity range than synthetic oil.

Use of mineral gearbox oil:

• The gearbox is too hot.

• The oil pressure increases.

• The shaft sealing rings wear out.

• The service life of the gearbox oil

is considerably reduced.

• Use synthetic gearbox oil.

• When synthetic gearboxes are

used, Viton shaft sealing rings

have to be used.

Thermal utilisation

( 339)

Note!

The utilisation of the gearbox is xxx %, regarding the max. torque.

Thus the limit value of 100 % is exceeded.

The gearbox is overloaded for a short time. The increased wear is within the permissible range.

The utilisation is xxx %, regarding the fatique strength.

Cause Effects Possible remedies

The gearbox is not rated for endur-

ance strength and will be overloaded

after the simplified fatigue strength

calculation.

• The service life of the gearbox is

reduced.

• The increased wear is within the

permissible range.

Select a different gearbox.

1 2 ... 447 448 449 450 451 452 453 454 455 456 457 ... 495 496

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze DSD Bedienungsanleitung Seite 452

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze DSD