Lenze DSD Bedienungsanleitung Seite 479
- Seite / 496
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23 479
18 Drive dimensioning messages
18.11 Brake chopper
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.11 Brake chopper
18.11.1 Ambient temperature of the brake chopper too high
18.11.2 Permissible site altitude of the brake chopper exceeded
18.11.3 Permanent utilisation of the brake chopper > 100 %
Warning!
The ambient temperature of the inverter is xxx °C. Thus the max. permissible ambient temperature of the
brake chopper of yyy °C is exceeded.
Cause Effects Possible remedies
The permissible ambient tempera-
ture is exceeded.
The drive gets too hot and switches
itself off (provided that a thermal
contact is available and is evaluated).
Fire hazard if the thermal contact is
not evaluated!
Contact Lenze.
Warning!
The site altitude is xxx m. It thus falls below the max. permissible site altitude of the brake chopper of
yyy m.
Cause Effects Possible remedies
Due to the lower atmospheric pres-
sure, the cooling effect of the air is re-
duced.
The drive gets too hot and switches
itself off (provided that a thermal
contact is available and is evaluated).
Fire hazard if the thermal contact is
not evaluated!
Contact Lenze.
Warning!
The permanent utilisation of the brake chopper is xxx %. Thus the limit value of 100 % is exceeded.
Cause Effects Possible remedies
The brake resistor is continuously
overloaded.
The brake resistor gets too hot.
• The thermal contact is opened.
Fire hazard if the thermal contact is
not evaluated!
Use larger drive.
- Drive Solution 1
- Designer 1
- Contents 10
- 1 Notes on usage 11
- 2 About this documentation 14
- Pictograph and signal word! 17
- 3User interface 18
- How to sort the results: 35
- How to filter results: 35
- How to open created notes: 38
- How to delete notes: 38
- 4.3.1 Messages 44
- 4.3.2 Software updates 45
- 4.4 Language 46
- 4.5 Settings 46
- 4.5.3 "Help" tab 47
- 4.5.5 "Units" tab 48
- User data 50
- Registration data: 50
- 4.6 User-specific settings 51
- 4.6.1 User-defined defaults 51
- 5Managing projects 52
- 6 Drive dimensioning tools 55
- 7Applications 100
- Mass calculator ( 405) 109
- Danger! 122
- Pole pair 191
- 8 Motion design 224
- symbol in the toolbar 225
- CINH = 1 271
- 9 Mains and environment 277
- ( 283) 282
- ( 285) 282
- ( 286) 282
- 10.1 Mechanical drive axis 283
- 10.1.1 Lenze gearbox 283
- 10.1.3 Feedback 284
- 10.2 Electrical drive axis 285
- 10.3 Drive concept 286
- 10.3.1 Gearbox features 287
- 10.3.1.1 Axial gearbox 287
- 10.3.1.2 Right-angle gearbox 288
- 10.3.2 Motor properties 289
- 10.3.4 Inverter properties 294
- 10.3.4.1 Frequency inverter 294
- 10.3.4.2 Servo inverters 296
- 11 Drive Dimensioning 308
- 12 Components in the DC bus 361
- 13 Details on Lenze products 377
- 14 Energy efficiency 378
- 15.1 Drawing 386
- Editing functions 389
- 15.2 Results 390
- 15.3 Protocols 391
- 15.3.1 Summarised protocol 391
- 15.3.2 Detailed protocol 391
- 15.3.3 Commissioning data 392
- 15.3.5 Output settings 393
- 15.4.1 Application Tuner 394
- 15.4.3 BlueGreen 394
- ( 378) 395
- 15.6.1 Dynamic reserves 396
- 15.6.2 Stationary reserves 396
- 15.6.3 Speed reserves 397
- 15.6.7 Reserves for gearboxes 399
- 16 Auxiliary means 401
- How to call the calculator: 404
- How to call the DSC: 425
- 17.1 Field weakening 426
- 17.5 Feedback systems 427
- Measured values 430
- 17.16 System disturbances 435
- [17-6] Group drives 436
- 17.19 ATEX for gearbox 437
- 17.21 Emergency-off scenarios 438
- 18.1 Applications 441
- 18.2 Drive system 445
- 18.3 Additional drive element 449
- 18.4 Lenze gearbox 450
- 18.5 Lenze motor 455
- 18.5.6 Motor speed too low 456
- > as winding ratio q 460
- 18.6 Brake 461
- 18.6.3 No brake available 461
- 18.7 Feedback 463
- 18.7.2 No feedback selected 463
- 18.8 Inverters 465
- 18.8.16 Activate VVC control 469
- 18.8.19 Mains choke required 470
- 18.10 Supply module 476
- 18.11 Brake chopper 479
- 18.12 Brake resistor 481
- 18.13 User motor 483
- ( 42) 485
- ( 46) 485
- 20 Glossary 486
- )(('%$& 494
Verwandte Produkte und Handbücher für Software Lenze DSD
Software Lenze Engineer v2.21 Bedienungsanleitung
(312 Seiten)
(312 Seiten)
(270 Seiten)
Software Lenze 8400 motec Bedienungsanleitung
(518 Seiten)
(518 Seiten)
Software Lenze i700 Bedienungsanleitung
(338 Seiten)
(338 Seiten)
Software Lenze 8400 TopLine Bedienungsanleitung
(176 Seiten)
(176 Seiten)
Software Lenze 8400 StateLine Bedienungsanleitung
(103 Seiten)
(103 Seiten)
Software Lenze 8400 HighLine Bedienungsanleitung
(157 Seiten)
(157 Seiten)
Software Lenze 8400 BaseLine C Bedienungsanleitung
(342 Seiten)
(342 Seiten)
Software Lenze 8400 BaseLine D Bedienungsanleitung
(260 Seiten)
(260 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.092 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern