Lenze DSD Bedienungsanleitung PDF herunterladen (Seite 311)

100

101

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23 311

11 Drive Dimensioning

11.1 Preselection of the geared motor

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

11.1.3 Average daily operating time

The Continuous rated curve of the gearbox is influenced by the average daily operating time.

11.1.4 Additional drive element (K)

Symbol Description

OT Daily operating time

• The operating time is required to determine the correction factors of the thermal speed for

geared motors.

Symbol Description

Type The following designs are available:

• Flat belt

•V-belt

•Chain

• Dedicated gearbox

• Gear wheel

• Toothed belt

 Note!

Whereas toothed belts, chain, and gears have a positive locking and thus present a low

tendency for slip, in the case of a V-belt/flat belt there is a speed difference between the

drive end and the output end (slip).

• This speed difference in general is low and is not considered by the DSD.

 Stop!

If belt drives/chain drives are used, the radial stress of the Lenze gearbox by the preten-

sion is not checked in the DSD. Carry this check out manually!

1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 495 496

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze DSD Bedienungsanleitung Seite 311

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze DSD