Lenze DSD Bedienungsanleitung PDF herunterladen (Seite 233)

100

101

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23 233

8 Motion design

8.2 MotionDesigner

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 Selection whether elements of the parameter may have linearly changeable values.

• Field activated: You can only enter one value. The element entered changes erratically between

the previous value and the input value.

• Field deactivated: You can enter two values. The entered element linearly changes between

these two values.

• No selection is possible for the "brake" and "controller inhibit" parameters, as these control sig-

nals can only have the states 1 or 0.

• Special features:

• Selection possible in the independent MotionDesigner.

• Selection possible in the application-dependent MotionDesigner if a motion profile created in

the independent MotionDesigner is loaded.

• In the case of a mass of the payload that can be linearly changed, the force resulting from the

mass alteration is not taken into consideration.

• In the case of an inertia that can be linearly changed, the torque resulting from the change in

inertia is not taken into consideration.

Please note:

Continuous or erratic changes of the mass during motion which have an impact on the torque are

not taken into consideration for the calculation in DSD.

Creating a parameter profile: Principles

( 240)

 Default value for the parameter.

• The parameter is automatically created with this standard value.

• The entry of more line elements creates an individual parameter profile.

• The "brake" and "controller inhibit" parameters do not have a default value as these control sig-

nals can only have the states 1 or 0.

Creating a parameter profile: Principles

( 240)

Legend Description

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 495 496

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze DSD Bedienungsanleitung Seite 233

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze DSD