Lenze E94AYCEP Bedienungsanleitung PDF herunterladen (Seite 103)

Lenze · E94AYCEP communication module (POWERLINK MN/CN) · Communication Manual · DMS 6.0 EN · 02/2014 · TD17 104

11 Parameter reference

11.3 Parameters of the communication module for slot MXI2

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

C14028

Description of the bits 0 ... 31

*) Not permissible for 9400 Servo Drives.

Parameter | Name:

C14028 | EPL node declaration CN

Data type: UNSIGNED_32

Index: 10547 = 0x2933

EPL index: See subcodes

The code declares the Controlled Nodes 1 ... 100 and their properties.

Value is bit-coded:

Bit 0 ... 31 see below

Subcodes Lenze setting Info EPL index

C14028/1 0 EPL node declaration CN 0x1F81.0x01

... ... ... ...

C14028/100 0 EPL node declaration CN 0x1F81.0x64

 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Bit Relevance Lenze Value Description

MN CN

0 (LSB) 0, 1 0 EPL node with this ID does not exist.

1 EPL node with this ID exists.

1 0, 1 0 EPL node with this ID is not a Controlled Node.

1 EPL node with this ID is a Controlled Node.

2 10

On detection of a booting Controlled Node, the application will not be informed.

1 On detection of a booting Controlled Node, the application will be informed and the Controlled Node

will be started.

3 1 0 Optional Controlled Node

1 Obligatory Controlled Node

4 0 0 The Managing Node is allowed to send reset commands.

The Managing Node must not send any reset command.

5 0 0 Software version verification of the Controlled Node is not required.

Software version verification of the Controlled Node is required.

6 0, 1 0 Automatic application software update is not allowed.

1 Automatic application software update is allowed.

7 - - 0 0 Reserved / No function

8 0, 1 0 Isochronously accessed Controlled Node

1 Asynchronously accessed Controlled Node (bit 9 is irrelevant)

9 0 0 Continuously accessed Controlled Node

1 Multiplex EPL nodes are supported.

10 0 0 No "POWERLINK to standard Ethernet" router function.

1 The device can be used as an "POWERLINK to standard Ethernet" router (router type 1).

11 0 0 No "POWERLINK to fieldbus" router function.

1 The device can be used as an "POWERLINK to fieldbus" router (router type 1).

12 0 0 The Managing Node does not send any PRes frames

1 The Managing Node sends PRes frames

13 ... 30 - - 0 0 Reserved / No function

(MSB)

0, 1 0 Bits 0 ... 30 inhibited

1 Bits 0 ... 30 enabled

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 147 148

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze E94AYCEP Bedienungsanleitung Seite 103

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze E94AYCEP