Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 126)

100

101

CNC programming

G functions

G functions individual descriptions

3.2

3.2.2

126

EDSTCXN EN 2.0

3.2.2.37 G100 Polar coordinates: linear interpolation, high rate

The preparatory function G100 corresponds in function to the preparatory

function G00 during the programming of the target positions in the

rectangular coordinate system.

G100 AXES U W

AXES Center coordinates

U Polar radius

W Polar angle

The center of the polar coordinate system is defined by two addresses: X/Y

for G17, X/Z for G18, Y/Z for G19. The assignment of the principal axes can

be changed with G16. When the axes U and W are used as main axes, these

cannot be used for the center programming.

The center coordinates can be programmed in absolute dimensions or in

incremental dimensions.

The target position is defined by the polar radius U and the polar angle W in

reference to the current center.

The radius and the angle can be programmed in absolute dimensions or in

incremental dimensions.

The programmed center coordinates have a modal effect.

The preparatory function G100 has a modal effect.

N100 G17

N110 G0 X50 Y0

N120 G100 X10 Y10 U20 W45

The zero point offset of the Z axis (tool length) is set in T1 to

50 mm here.

Syntax

Meaning of the addresses

Explanation

Example

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 126

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control