Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 70)

100

101

Getting started

Creating a PLC sample program

Loading the PLC sample program into the control system

2.12

2.12.3

EDSTCXN EN 2.0

4. Double−click the "Address" field and specify the correct IP address.

(¶ 28).

ETCM041

) Note!

Do not use any leading zeros in the IP addresses. Otherwise, the

IP address will be interpreted as octa decimal number.

5. As the control system contains a Motorola processor, the field

"Motorola byteorder" must be set to "Yes". If required, correct this

setting by double−clicking several times.

) Note!

The left window area shows the connection options, in this case

the two connections "local_" and "network".

The current setting is the setting that is displayed in the right

window before you click OK, it is used for log in.

6. Close the window with OK.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 70

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control