Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 245)

Interface PLC <˘> NC operating system

Definitions

Data block 1

5.1

5.1.2

245

EDSTCXN EN 2.0

Data word Name Direction Type of signal

136 Error number NC ® PLC static

This is where the actual error number is reported. An error number is always

assigned to the corresponding error module. The error can only be clearly de-

termined by means of the error number and error module.

Data word Name Direction Type of signal

137 Current submenu NC ® PLC static

reserved

Data word Name Direction Type of signal

148.00−255.15 Text output G253 NC ® PLC static

The texts that are output with the G function G253 (without parameter E)

are shown from DW148 onwards for the PLC.

5.1.2 Data block 1

In data block 1 the standard signals are exchanged. Standard signals are all

signals and messages recorded in the respective specifications, which reflect

the state of the PLC and the NC and affect the operation of the NC or the PLC.

They are also signals/messages that do not exist in the general specifica-

tions but are part of the standard scope of the ETC.

In the following, you can find an overview of the assignment of the data

block. This is followed by individual descriptions of signals and messages.

Data word Name Direction

000.00

000.01

000.02

000.03

db1_sps2nc_notaus_bit

db1_sps2nc_vorschubfreigabe_bit

db1_sps2nc_soforthalt_bit

db1_sps2nc_einzelfunktionsperre_bit

PLC ® NC

001.00 – 001.15

002.00 – 002.15

db1_sps2nc_vorschubfreigabe_w

db1_sps2nc_position_halt_w

PLC ® NC

003.00 – 003.15

004.00 – 004.15

db1_sps2nc_verfahrtastenfreigabe_plus_w

db1_sps2nc_verfahrtastenfreigabe_minus_w

SP ® NC

PLC ® NC

005.00 – 005.15 db1_sps2nc_reglerfreigabe_w PLC ® NC

007.00 db1_sps2nc_einlesefreigabe_bit PLC ® NC

009.00 – 009.07 db1_sps2nc_programmstart_b PLC ® NC

009.08 – 009.11 db1_sps2nc_use_spsoverride_b PLC ® NC

012.00 db1_sps2nc_programmstop_b PLC ® NC

012.08 db1_sps2nc_unterbrechen_bit PLC ® NC

013.00 – 013.07 db1_sps2nc_einzel_folgesatz_bit PLC ® NC

013.08 – 013.15 db1_sps2nc_satzausblenden_bit PLC ® NC

014.00 db1_sps2nc_rueckzug_bit PLC ® NC

016.00 – 017.15 db1_sps2nc_tastensignale_aw PLC ® NC

018.00 – 021.15 db1_sps2nc_qbit_signale_aw PLC ® NC

031.00 – 031.15 DB1_sps2nc_freigaben_mmi_w PLC ® NC

032.00 db1_sps2nc_mfkt_quitt_bit PLC ® NC

Assignment

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 245

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control