Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 48)

100

101

Getting started

Creating a CNC sample program

Entering and saving a CNC program

2.10

2.10.2

EDSTCXN EN 2.0

2.10.2 Entering and saving a CNC program

We create a program for a profile with rounded reference points.

Starting point: The cursor flashes in the top right of the text editor and the

graphic area is displayed.

1. Enter the CNC program in the text editor according to the following

table:

Line Input in the text editor Meaning Display in the graphic area

1%1 Determine program number

2 G1 F10000 Determine travelling speed

3 G17 Determine plane

4 G0 X10 Y10 Travel to starting point at

high rate

creates a straight line from

the zero point to the starting

point

5 G2 X20 Y20 R10 Execute a section of the

square profile

creates a quarter circle

6 G1 X30 adds a straight line

7 G2 X40 Y10 R10 adds a quarter circle

8 G1 Y0 adds a straight line

9 G2 X30 Y−10 R10 adds a quarter circle

10 G1 X20 adds a straight line

11 G2 X10 Y0 R10 adds a quarter circle

12 G1 Y10 adds a straight line to a

closed square profile

13 G0 X0 Y0 Travel to zero point at high

rate

14 M30 End of program

ETCN015

2. Press <F4> (Save as).

3. As program name, enter e.g. test.din.

4. Press <Enter>.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 48

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control