Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 68)

100

101

Getting started

Creating a PLC sample program

Loading the PLC sample program into the control system

2.12

2.12.3

EDSTCXN EN 2.0

2.12.3 Loading the PLC sample program into the control system

) Note!

The steps described in this chapter only apply to the ETCHx

variant (DIN rail variant); they are not required for the ETCPx

variant (PCI card).

Via the ETC−CoDeSys, the connection from the PC to the control system can

be set, optionally via a serial connection (RS232 interface) or via the network.

1. Connect the PC and ETC via the serial interface.

2. Select Online

W Communication Parameters.

3. Click on New.

ETCM036

4. Enter a connection name (e.g. local_) and select the serial driver "Serial

RS232".

ETCM037

5. Click OK.

6. Specify the parameters of the interface (e.g. COM1 with baud rate,

parity and stop bit). For this purpose, double−click the corresponding

field.

Serial connection

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 68

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control