Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 300)

100

101

ETC−MMI

"Automatic" operating mode

7.5

300

EDSTCXN EN 2.0

Start Starts the selected program or blockwise processing in

single block operation.

Stop Immediately stops program execution. All axes are

stopped with the set deceleration ramps. After a restart,

processing is started again.

Feed stop If "Feed stop" is activated, the axes are no longer

traversed, until the function has been deactivated. The

axes are stopped with the set deceleration ramps. The

current traversing speed and the set override value are

displayed in the status field.

The function must be executed via the PLC. Either "Feed

stop" or "Optionally stop" is active.

ETCN072

Override+ Increase the axis or path speed of the selected axis (in

percent of MK_VMAX). Over 10%, the value is changed

in steps of 10%, below 10% in steps of 1%.

Override− Reduce the axis or path speed of the selected axis (in

percent of MK_VMAX). Over 10%, the value is changed

in steps of 10%, below 10% in steps of 1%.

Drawing − border A frame is drawn around the DIN program and

dimensioned in the input units.

Enlarge Zoom into the profile

Reduce Zoom out of the profile.

Zoom The graphic is maximised. All other displays are hidden.

Vertical function keys

Horizontal function keys for

graphics "on"

1 2 ... 295 296 297 298 299 300 301 302 303 304 305 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 300

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control