Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 19)

100

101

Getting started

Status display

2.2

EDSTCXN EN 2.0

When the control enters the operating mode after start−up, the following

pattern of flashing and indications applies.

LED Meaning

Watchdog Watchdog, must always illuminate when running.

Reserved Without function

ERROR Flashes after an exception (violation of the control program protection during

runtime, exceeding the permitted variable range, division by zero etc.).

LED 1 Flashes at the clock pulse of the coarse interpolator

LED 2 Flashes at the clock pulse of the interpreter

LED 3 Flashes at the clock pulse of the central control

LED 4 Flashes at the clock pulse of the fine interpolator

LED 5 Flashes with each RS232 interrupt or CAN interrupt

LED 6 Flashes at the clock pulse of the PLC cycle time

) Note!

The "flashing" frequency can be so low with short programs,

that the LEDs appear dark.

Operation

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control