Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 72)

100

101

Getting started

Testing CNC and PLC program

2.13

EDSTCXN EN 2.0

2.13 Testing CNC and PLC program

) Note!

Basically, the operation of the CNC program is possible:

ƒ without connected mechanics and drives.

This is achieved by setting the machine constant

MK_TEST_OHNEMECHANIK=1.

ƒ without a PLC program.

This is achieved by setting the machine constant

MK_SPS_DUMMY=1.

For the following tests with program and mechanics, the machine constants

must be set as follows:

MC keyword Numbe

r of

values

Values

MK_TEST_OHNEMECHANIK 1 0

MK_SPS_DUMMY 1 0

1. Connect the hardware according to the requirements (¶ 60).

– The inputs "Tool down" and "Tool up" must be set according to the

progress of the program (M14, M15). Thus, 24 V must be

continuously applied to the inputs or the inputs must be switched in

time.

1. Start the PLC sample program in the CoDeSys. For this purpose,

double−click on the file "Training1.pro" in Windows File Explorer

(¶ 61).

CoDeSys starts and the sample program is loaded.

2. Load the PLC program into the control system via Online

W Log in

(¶ 68).

3. Start the PLC program via Online

W Start (¶ 68).

Test setting

Connecting the hardware

Start PLC program

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 72

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control