Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 237)

100

101

Machine constants

List of machine constants

4.16

237

EDSTCXN EN 2.0

/*−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−*/

/* 5. Technology − specific settings */

/*−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−*/

MK_MFKT_UPR_TABELLE 0, /* table of M functions after which a */

0, /* G22 L9000+Mfktnr is to be added. */

0, /* the table may have a max. of 16 entries */

MK_WLK_C_GRENZWINKEL 45; /* cutting/sewing: angle up to which the */

/* C axis is to be abruptly fed */

MK_X_WINKEL 0; /* angle of the inclined X axis in */

/* degrees (X−Z plane) */

MK_GEWINDE_VMAX 0; /* thread grinding */

MK_SPINDELMAX_GS1 6000, /* spindle speed in [rpm] at 10 V */

6000, /* for gearbox stage 1 for spindle type 9 */

6000;

MK_SPINDELMAX_GS2 6000, /* spindle speed in [rpm] at 10 V */

6000, /* for gearbox stage 2 for spindle type 9 */

6000;

MK_SPINDELMAX_GS3 6000, /* spindle speed in [rpm] at 10 V */

6000, /* for gearbox stage 3 for spindle type 9 */

6000;

MK_SPINDELDREHZAHLMAX 6000, /* max. permissible spindle speed in [rpm] */

6000, /* (not taken into account by all */

6000; /* spindle handlers.) */

MK_SPINDELDREHZAHLMIN 0, /* min. permissible spindle speed in [rpm] */

0, /* (not taken into account by all spindle handlers) */

MK_TECHNOLOGIEDATEN1 0, /* application−spec. technology param., which */

0, /* lie in the parameter field from P760 */

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 237

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control