Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 16)

Getting started

System overview

Connecting ETCHx and PC

2

2.1

2.1.3

l

16

EDSTCXN EN 2.0

2.1.3 Connecting ETCHx and PC

Three types of connections are possible between the ETCHx and a PC.

Connection type Cable version Description

Serial connection System cable type EWL 0068

or a comparable RS232 cable

with double−sided 9−pin

SUB−D socket (for the pin

assignment see ETC Hardware

Manual)

This connection is only

required for commissioning!

A free COM port at the PC is

connected with the RS232

interface of the ETCHx. The PC

communicates via a terminal

program with the monitor

interface of the ETCHx.

Local connection via Ethernet

(pear−to−pear connection)

System cable type EWL 0065,

EWL 0066 or EWL 0067

(double−sided RJ45)

A network card in the PC is

connected with the Ethernet

connection of the ETCHx via a

cross−over cable.

Communication takes place

via the TCP/IP protocol.

Network connection Ethernet patch cable STP Cat5

(double−sided RJ45)

The ETCHx is connected to a

separate or existing network

(e.g. Intranet) via an Ethernet

connection. Communication

takes place via the TCP/IP

protocol.

0

1

2

ETCM004

0 Connection via serial interface

1 Local TCP/IP connection

2 Network TCP/IP connection

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha