Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 154)

100

101

CNC programming

G functions

G functions individual descriptions

3.2

3.2.2

154

EDSTCXN EN 2.0

The axes A and B should be coupled one to one to the movement of axis C

after the home position approach. The starting positions and coordinate

system offsets of all three axes should be equal when they are activated, i.e.

b=0 and m=1.

G162 Delete axis group

G74 C0 A0 B0 Home position movement

G0 C0 A0 B0 approach all axes to be coupled to the same starting position

G162 C0 A1 Couple A axis to C axis

G162 C0 B1 Couple B axis to C axis

M174 Inform PLC that axis coupling has taken place

3.2.2.65 G175 Axis replacement

Replacement of two axes in terms of the input.

G175 AXES

AXES Validity identification of the two axis letters, which should be replaced;

numerical value without meaning

G175 can be used to program a replacement of the axis assignment. Two

similar axes can be replaced by one another, i.e. only linear axes can be

replaced by linear axes and rotation axes with rotation axes. All position

specifications of an axis are referenced to the replaced axis after the

replacement.

It is only possible to replace axes again after the original state has been

restored again by programming G175 without further specifications.

G175 U0 Z0 All path specifications for "U" for the "Z" axis are interpreted from here. On

the machine, the Z axis traverses the paths programmed for U and vice

versa.

Example

Syntax

Meaning of the addresses

Explanation

Example

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 154

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control