Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 221)

100

101

Machine constants

Technology−specific settings

MK_MFKT_UPR_TABELLE

4.15

4.15.1

221

EDSTCXN EN 2.0

4.15 Technology−specific settings

4.15.1 MK_MFKT_UPR_TABELLE

This machine constant is a list of up to 16 M function numbers, which

generate a branch in a subprogram during processing within a DIN program.

A difference is made between the following cases:

Value Meaning

< 500 When the configured M function appears in the program, a subprogram call with

the program number 9000 + M function number is inserted subsequently. The

programmed M function is output before the first executable block of the

subprogram is executed.

500

600

700

800

900

Each of these values stands for the following 99 M function numbers. Every time

one of these 100 M functions appears in the program, the M function is replaced

with the program number 9000 + basic M function number by means of a

subprogram call. Therefore, M621 becomes G22 L9600. The programmed M

function is not output. Therefore, no processing time is required in the PLC for the

M function.

The M function, which lead to the subprogram call, is stored in the parameter

field in P562 for NC channel 0 and in P594 for channel N. It can be evaluated

in the subprogram.

For further information, refer to chapter "M functions" (¶ 175).

4.15.2 MK_TECHNOLOGIEDATEN1 ... MK_TECHNOLOGIEDATEN4

These machine constants contain 10 entries each, which are stored

one−to−one in the parameter field of P760 ... P799 where they can be used as

required. For the assignment of the parameter field, refer to chapter "P field"

(¶ 180).

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 221

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control