Lenze ETC Motion Control Bedienungsanleitung PDF herunterladen (Seite 193)

Machine constants

Software configuration

MK_KUNDE

4.3

4.3.1

193

EDSTCXN EN 2.0

4.3 Software configuration

4.3.1 MK_KUNDE

This machine constant is a string constant by means of which the different

customer−specific extensions are activated within the control. This includes

technology−specific correction modules and M function handler.

Value Meaning

"" Standard TRC, no special treatment of M functions (default).

"SCHNEIDEN"

(CUT)

TRC with tangential correction of the C axis for cutting technology, special

treatment for M14, M15, M16 und M1014, M1015, M1016.

"SCHNEIDEN1"

(CUT1)

Like "SCHNEIDEN" (CUT), but with additional functions for the

management of the knife length at the beginning and the end of the

profile, additional special treatment for M46, M47, M50, M51 and M1046,

M1047, M1050, M1051.

"SCHNEIDEN2"

(CUT2)

TRC compatibility mode with tangential correction of the C axis for cutting

technology without special treatment of M functions.

"SCHNEIDEN3"

(CUT3)

Like "SCHNEIDEN2" (CUT2), but an additional rectangular approach or

withdrawal block is inserted for G41/42 or G40.

... Customer−specific modules that cannot be listed here.

4.3.2 MK_VOREINSTELLUNG

This machine constant is a string constant via which several default settings

of G functions can be implemented. The following G functions may be

specified within the string separated by a semicolon:

Value Meaning

G0−G3

G100−G103

Set modal G function, optionally with speed specification F

Example: AG1 F1000

G17 / G18 / G19 Selection of main plane X−Y / Z−X / Y−Z

G26 Activation of software limit switch of the specified axes, example: AG26 X0

G30 / G31 Activation of route operation / path operation

G60 Activation of Look Ahead or exact positioning, example: AG60 X0

G90 / G91 Activation of absolute dimension / incremental dimension for all axes

G112 Activation of tangential correction of the specified axis (A,B,C,a,b,c),

example: AG112 C1

G122 Configuration of traverse button operation, example: AG122 X1

The specified string must be specified in inverted commas and must not

exceed 80 characters. The configured default settings are automatically

activated when the control is started up after the MCs have been loaded as

well as at the program end and after a program termination.

MK_VOREINSTELLUNG "G17; G1 F30000; G26 X0 Z0";

For further information on the G functions, refer to chapter "CNC

programming".

Example

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 427 428

Kommentare zu diesen Handbüchern

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Bedienungsanleitung Seite 193

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Lenze ETC Motion Control