Lenze EVS9332xP Bedienungsanleitung PDF herunterladen (Seite 124)

100

101

Wiring of the standard device

Standard devices with a power of 45 kW

Motor connection

5.6

5.6.6



5.6−8

EDSVS9332P EN 5.0−07/2013

Characteristics of the connection for motor temperature monitoring:

Terminals T1, T2

Connection

l PTC thermistor

– PTC thermistor with defined tripping temperature (acc. to

DIN 44081 and DIN 44082)

l Thermal contact (NC contact)

– Thermostat as NC contact

Tripping point l Fixed (depending on the PTC/thermal contact)

l PTC: RJ



> 1600 W

l Configurable as warning or error (TRIP)

Notes l Monitoring is not active in the Lenze setting.

l If you do not use a Lenze motor, we recommend the use of a PTC

thermistor up to 150°C.

2.5 Nm

22.1 lb-in

U, V, W,

15 Nm

132 lb-in

M5x12

3 Nm (26.5 lb-in)

}

9300std031

Fig. 5.6−4 Motor connection with PTC thermistor or thermal contact (NC contact)

 PE stud

PE cable connection with ring cable lug

 U, V, W

Motor cable connection

Check the correct polarity. Observe maximum length of the motor cable.

Max. connectable cable cross−section: 120 mm

with ring cable lug

 Shield clamps

Place shields of motor cable with large surface on the shield sheet and

fasten with shield clamps and M5 × 12 mm screws

 Cable ties

Strain relief of motor cable

 T1, T2 for motor temperature monitoring

Cable connection for PTC thermistors or thermal contacts (NC contacts)

Place shield with large surface on PE stud

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 444 445

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze EVS9332xP Bedienungsanleitung Seite 124

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze EVS9332xP