Lenze EVS9332xP Bedienungsanleitung PDF herunterladen (Seite 195)

100

101

Commissioning

Adjusting the rotor position

6.8



6.8−3

EDSVS9332P EN 5.0−07/2013

Procedure

8. Inhibit controller (X5/28 = LOW).

Reset C0006 to default setting if necessary.

10. Click C0003 and save the setting by selecting C0003 = 1.

11. Disconnect the mains and reconnect the motor to the machine.

 Danger!

Uncontrolled movements of the drive after an "Sd7" error in

conjunction with absolute value encoders or in the case of a

"PL−TRIP" error.

If the rotor position adjustment was completed with an "Sd7" or

"PL−TRIP" error ( 9.3−1) it was not possible to assign the rotor

position to the feedback system. In this case the drive may carry

out uncontrolled movements after the controller has been

enabled.

Possible consequences:

ƒ Death or severe injuries.

ƒ Destruction or damage to the machine.

Protective measures:

ƒ Repeat rotor position adjustment (start with step 1).

ƒ Check the wiring and the interference immunity of the

encoder at X8.

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 444 445

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenze EVS9332xP Bedienungsanleitung Seite 195

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lenze EVS9332xP